The television is an essential appliance in many homes, but it consumes the most energy. Many prefer it and look for the latest models to watch series, news, movies, sports, and even viral videos of the moment (if it is a Smart TV). So that this useful device is not a headache on your electricity bill, we bring you some useful recommendations.
Television may not have as great a power in Watts as it does with household appliances such as microwaves or refrigerators. Still, its energy consumption can be great for hours; it usually remains on. Thus, we have explained how you can minimize the amount of electricity your TV uses and how to get cheap electricity to keep powering it.
In which cases can a television consume more energy?
There is an additional factor that can cause problems with the electricity bill, and it refers to the inappropriate use of the television. An excessive shine can increase energy consumption and spending by up to 100%, that is, double what would be spent with good use. Let’s take the example of the 55′ television again: consumption with high brightness would become higher.
A very common but harmful custom to our energy expenditure is falling asleep with the TV on. Using the television to fall asleep will cost you up to 200%, four times more than the electricity bill. In both cases, the useful life of the device is shortened.
What recommendations do you give the public to prevent television from consuming too much energy?
For this reason, Electricity Express offers the following recommendations to the general public on the use of televisions so that they do not cause more damage to our pockets:
- It must be taken into account that energy consumption increases up to double when the images are brighter. Therefore, in order to take advantage of the energy-saving option that most of today’s televisions have, you must locate in an area with low lighting.
- It is not a good idea to sleep with the television on because, in addition to consuming a lot of energy, it shortens its useful life; in any case, program the time for automatic shutdown.
- If you must do work or another activity, turn off the television; it is a bad idea to leave it on because it will waste energy and cost money.
How to know the energy consumption of your appliances?
- Step 1: Find out the power of your appliance in Watts (W).
- Step 2: Once you have this data, convert it to kilowatts (kW), dividing it by 1,000.
- Step 3: Calculate the number of hours per month that the appliance is on.
- Step 4: Finally, calculate the electrical energy consumed in a month by multiplying the two previous results (hours of use and kWh).
How to avoid excessive consumption of electrical energy?
It is important that you disconnect those electrical devices that you are not using. However, some electrical appliances, such as refrigerators, should not be without electricity due to their very function. With them, we must be clear about how much energy they use approximately and take it into account in the monthly budget.
The Ministry of Energy and Mines explains that the consumption of electronic devices in standby mode (off but connected) is responsible for between 5% and 10% of the total electricity consumed in most homes.
What electrical devices should you not keep plugged in for a long time?
- Televisions: Common ones in operation consume 186 volts. In standby, they use 3.06 volts. Off, but still plugged in, they use 2.88 volts. LCDs consume 28 volts on, 1.38 when standby, and 1.13 off and plugged in.
- Desktop Computer: When powered on and in use, draws 74 volts. Standby 21 watts, and when off but still plugged in, uses 2.84 volts.
- Notebook Computer: Fully charged, turned on, and running requires about 30 volts. Running and charging, 44 watts. Standby, 15 volts. Off and plugged in, it consumes 8.9 volts. The charger only plugged in does the same with 4.42 volts.
- Cell phone charger: When charging, the smartphone consumes between 2 and 3 watts, but when left plugged in without charging, it is 0.26 volts.
- Printer: In standby mode, it has an average consumption of 5 volts per hour.
- Modem or router: A working DSL modem gets to 5.37 volts. Off and connected is 1.37 volts. The cable modem uses 6.25 volts when it’s running, as well as 3.84, while it’s turned off and plugged in.
- Scanner: When in use, it consumes 9.6 volts. If it stays plugged in when not in use, it continues to draw 2.48 volts.
- Microwave Oven: On and running, it draws 1,433 volts. If it’s not unplugged, it’s 3.08 volts. However, if you leave the door open and it’s still plugged in, it draws 25.79 volts.
- Electric stove: turned on, they usually consume 340 volts, but turned off and plugged in, it reports 4.21 volts.
Conclusion
You can only minimize your residential electricity usage and not totally spot the consumption. Thus when you run out of energy and need an urgent electricity connection the same day, your best plug for this is Electricity Express. You can also get the best cheap and reasonable electricity rate and buy electricity without a deposit here.
